Lockers are normally quite small, of varying heights and tier arrangements. Width and depth usually conform to standard measurements, although strange sizes are now and again found. Public places with lockers often contain many them, such as in a college. They will are usually made of painted sheet metal. armario taquilla
The characteristics that usually differentiate them from other types of cabinet or wardrobe or storage container are:
They normally are equipped with a lock, or at least a facility for padlocking (occasionally both).
They normally are designed for use in general public places, and intended for the short- or long term private use of individuals for storing clothing or other personal items. Users may rent a locker room for a single use or for a time frame for repeated use. Some lockers are offered as a free in order to people taking part of certain activities that require the safekeeping of personal items.
There are usually although not always several of them joined collectively.
Lockers are usually actually joined together side by side in banks, and are commonly produced from material, although wood, laminate and plastic are other materials sometimes found. Steel lockers which are banked collectively share side walls, and are constructed by starting with a complete locker room; further lockers may then be adding by making the ground, roof, rear end wall, door, and just one extra side wall membrane, the existing side wall structure of the previous locker room serving as the other side wall of the new one. Them, flooring, and roof of lockers may be either riveted together (the classical method) or, more recently, welded together.
Locker doors will often have some kind of air flow to give the movement of air to help in cleanliness. These ports usually take the form of a series of horizontal angled slats at the top and lower side of the door, although sometimes parallel rows of small square or rectangle-shaped holes are simply instead, operating up and down the doorway. Less often, the side or rear wall surfaces may also have similar ventilation.
Locker doors usually have door stiffeners set vertically to the inside of the door, in the form of a metal plate welded to the lining surface, and protruding outward a small percentage of an inch, thus adding to the strength of the door and so that it is harder to power open.
Lockers are often created by the same companies who produce cupboards and shelves
There are a number of features or characteristics which may vary in lockers. Since purchasers should specify what they want in all these when ordering, it is somewhat more common to order a particular configuration rather than buy “off the shelf” in a store, although certain very common configuration settings can be found in shops fairly easily. These kinds of features include:
Bank size: This specifies the amount of lockers wide an unit is. It does not always label the total amount of compartments, but instead the number of spaces wide the complete cabinet is. So a bank of three may contain 6 lockers, for instance, if they are two-tier lockers. To put it briefly, the total quantity of lockers is the bank size multiplied by the number of divisions. Sometimes the word “bay” is employed rather than “bank”, although “bank” appears to be a lot more standard term; on other occasions, “bay” refers to an individual locker width within a bank, including all tiers of locker immediately on top of each and every other.
Tiers: lockers may be specified as single-tier (full height), two-tier, three-tier, and so on., meaning that the lockers are stacked on top of the other person in tiers two high, three high, etc. Tiers are commonly up to eight high; on occasion, even more tiers may be found, when it comes to very small lockers for such purposes as storing notebook compters. The most common numbers of tiers present in lockers are, in order, one, two, and four; three-tier lockers are alternatively less common, and other numbers such as five, six, or eight even less common still – seven almost non-existent. As locker cabinets are most commonly 6 feet (182. 9 cm. ) high (although there are exceptions), the height of specific lockers varies according to how many tiers are accommodated within the cupboard. The height of person lockers is usually roughly 6 feet (182. dokuz cm. ) divided by the quantity of tiers, so that two-tier lockers are about 3 feet (91. 4 cm. ) high, three-tier lockers 2 feet (61 cm. ) high, four-tier lockers 1. 5 foot (45. 7 cm. ) high, and so on. Standard features often differ in line with the number of divisions: single-tier lockers usually incorporate a shelf about a ft . (roughly 30 cm. ) from the top, and a hanging rail (sometimes with one or two hooks) immediately underneath that, towards the top of the large area beneath the shelf; two- or three-tier lockers usually lack the shelf, but include the hanging train; lockers with four or even more tiers usually have not one of the fittings, but comprise of only the bare compartment.